Drum Wood Chipper is mainly used for cutting branches, small trees, paper plates, planks with diameter or thickness below 120mm. The cut wood chips is used as pellets making raw material. The cutting part is a rotating drum with a number of cutting knives which can process wood into wood chips.
Small Wood Chipper,Wood Chipper,Pallet Crusher,Waste Wood Crusher Machine Jinan Shanghangda Machinery Co., Ltd. , https://www.jinanshdmachine.com
(1) Preventing the attenuation of the transmission signal of the wing gate
Wing gate and access controller installation to take into account the distance between the controller and the reader, the ideal transmission distance is within 100m. For signal transmission cables, cable shielding and signal attenuation due to long-distance transmission must be taken into consideration. During the construction of the pipeline, the line pipe and cable tray made of steel should be used, and reliable grounding should be performed.
(2) The electromagnetic interference shielding wing gate <br> <br> reader for wing gates, door opening button special attention to electromagnetic interference, in particular interference light switches, electric typewriters and computers and the like. If conditions permit, the reader should be installed at a distance of more than 30cm from the power source.
(3) debug system debug access control system software is the key to ensure the quality of the forbidden wing gate system. The emphasis is on the commissioning of the access controller and the operation of the system software. The commissioning of these two parts must be carried out by the manufacturer at the same time. The function of the wing gate controller is that in addition to the reader input, it is also necessary to set the relay linkage output function according to needs, the time and location of the alarm generation and start-up such as cameras, alarm horns, etc.
Xingshun An teach you how to install wing gate access control system
Xingshunan is a professional manufacturer of three-roll gates, swing gates, wing gates, translating gates and full-high gates. It has a professional team for the installation of wing gates. It is believed that the wing gate access control in the community is convenient for the majority of households. The visitor safety issue and the vehicle's anti-theft security problem, but the drawbacks caused by wing gates also followed. Wing Gate manufacturer found that if the household access control is not visible, then the visiting guests will be posing as the identity of another person, such as wing gate students or three roller gate friends, channel gate express company, etc., so that the owner will not be protected Open the door under the circumstances. Therefore, it is recommended that the community's contractors use the visual access intercom system as much as possible to improve the safety of household wing gates.