Seat belt test equipment is developed according to the latest standard of seatbelt GB 6095-2009 "Safety belt". It is mainly used to test the overall dynamic load of the seatbelt, the overall static load of the seatbelt, the overall slide test of the seatbelt, the tension fracture test of the seatbelt, and the safety Testing of seat belts with static load on components and belt corrosion resistance test.
The equipment involved includes seat belt impact tester, seat belt overall static tester, seat belt overall slide tester, seat belt overall dynamic load overall static load tester, simulator, seat belt tension tester, salt spray test chamber And other equipment. The following is the details of the device:
ZD-711 belt impact tester (overall dynamic load)
First, the main purpose
According to the latest standard of safety belt GB6096-2009 "safety belt detection method" developed for the safety belt overall dynamic load bearing performance of the special testing equipment.
Second, the main technical indicators
High-speed single-chip data acquisition and processing system, continuous sampling time 20s, continuous sampling frequency 30KHZ, automatically lock the maximum impact force value;
Dynamic force sensor: measuring range (0~20)KN; measuring accuracy: ±2.0% of full scale range;
Meet the standards: GB6095-2009 Seat Belt, GB6096-2009 Seat Belt Test Method
ZD-712 seat belt overall static load tester
First, the main purpose
Seat belt overall static load tester is designed according to the new seat belt GB6096-2009 "safety belt detection method" and is used as the overall static load capacity test of the seat belt.
Second, the main technical indicators
Force measurement system: digital display real-time tensile force value;
Mobile time timer device: set the time to automatically alarm reminder, the time device can be installed according to user needs to the appropriate location;
Meet the standard: GB/T6096-2009 "safety belt test method"
ZD-719 seat belt test rubber dummy
First, the main purpose:
Tests for various performances of seatbelts are in full compliance with the dynamic load and overall static load tests within the new national standards.
Second, the main technical indicators:
40mm thick rubber on the outer surface; Shore hardness: greater than 90;
Simulated quality: 100kg ± 2kg;
Meet the standard: Appendix A of GB/T6096-2009 "Safety belt test method"
ZD-715 seat belt overall dynamic load and static load tester
First, the main purpose
According to the new national standard GB6096-2009 "belt belt detection method" designed for seat belts, it is mainly used as a special experimental instrument for the dynamic load carrying performance (impact performance) of seat belts and the overall static load tester for seat belts.
Second, the main technical indicators
Seat belt dynamic load:
High-speed single-chip data acquisition and processing system, continuous sampling time 20s, continuous sampling frequency 30KHZ, automatically lock the maximum impact force value; dynamic force sensor: measurement range (0 ~ 20) KN;
Seat belt static load:
Force measurement system: digital display real-time tensile force value;
Mobile time timer device: set the time to automatically alarm reminder, the time device can be installed according to user needs to the appropriate location;
Meet the standards: GB6095-2009 Seat Belt, GB6096-2009 Seat Belt Test Method
ZD-717 seat belt overall slide tester
First, the instrument introduced
The entire seat belt slide tester is designed according to the new national standard of the seat belt, and is used to test the ability of the surrounding belt to withstand the overall sliding down. GB/T6096-2009 "safety belt test method" in the 4.5 test requirements.
Second, the main technical indicators
The distance between the strap suspension point and the fixed hanging point is 200~300mm;
The dummy is equipped with anti-friction protection pads, which can effectively protect the dummy and extend the life of the dummy.
Meet the standard: GB/T6096-2009 "safety belt test method"
ZD-718 belt tension testing machine
First, the main purpose
Mainly used for the main belt safety belt, safety rope static load test; parts static load test; buffer deformation test, accidental opening force test.
Second, the instrument features
1. Adopt high-precision, all-digital speed control system and precision reducer to drive the test of precision and no-gap screw to achieve a wide range of test speed adjustment. The test process has low noise and stable operation.
2. The universal joint adopts a cross pin structure and has a swing angle limiting function. On one hand, it is convenient for the sample to be clamped and the test concentricity is ensured. On the other hand, the effect of the irregular sample on the sensor is well eliminated.
3, touch key operation mode, liquid crystal display real-time display. The display interface can display the test method selection interface, test parameter selection interface, test operation and result display interface and curve display interface, which is convenient and quick.
4. It has two protection modes: mechanical protection and software. It will stop automatically when it exceeds the limit height, and automatically stop when it exceeds the rated load; and it also has an over-current emergency stop switch.
Third, the main technical indicators
1, models: two arms (LCD display)
2, the maximum test force: 50kN
3, accuracy level: 1
4, test force accuracy: better than ± 1% of the indication
5, test force: minimum resolution 0.01N
6, displacement measurement: resolution is 0.01mm
7, deformation accuracy: better than ± 1%
8, speed range: 1mm/min~~200 mm/min
9, test stroke: 600mm (can be customized according to customer needs)
10, stretching space: 600mm (can be customized according to customer needs)
11, compression space: 600mm (can be customized according to customer needs)
12, test protection function: overload protection
13, security protection device: limit switch
14, power supply: 220V 50Hz
Fourth, applicable standards
GB6095-2009 Seat Belt GB6096-2009 Seat Belt Inspection Method
ECU Environmental Control Unit
ECU Environment Control Unit is portable cooling air conditioner unit special design for military camps, relief camps,medical camps, working camps. Portable ECU offer all-in-one services for air conditioning, area cooling, dehumidifying, and portable heating needs. Environment control unit completely self-contained and portable, portable ECU have 36000BTU and 60000BTU two models for your choice. The ECU control system is by contactor only, it's much more reliable design for military camps use. ECU can supply cooling at max 55 ℃, and supply heating at max -45℃ environment. The environment control unit most important advantage is can be stack on each other, so can save the space on transport and storage.
• Easy installing, just connect the flexible duct to Tent Air Conditioner and the tent,connect the power, then tent air conditioner can start to work;
• Quick installing, one person just one minute can finish the install.
•The AC is built into a cabinet manufactured from galvanized and powder coated steel sheet, the steel machining by CNC machining center, with a higher structure strength;
•Top finish painting is standard Olive green, also can painting according customer`s needs;
•Can provide cooling at ambient temperature up to +60℃, tent air conditioner heat pump can provide heating at ambient temperature at -10℃;Heater Resistance can provide heating at ambient temperature at -45℃;
• Environment-friendly R410a refrigerant gas;
• High/low pressure prostate switch will protect the compressor from damage if the system with higher or lower pressure than the normal pressure data, and will auto back to work when the pressure normally;
• Emerson thermal expansion valve, it can exactly control the refrigerant gas volume into the the evaporator,make sure the whole system always in the best working condition when cooling and Heating;
• Connect to the mains power supply or a separate diesel generator through a 7.5 m power cable, can equip with industrial plug according needs;
• Equip two pcs insulated flexible hose for each unit, to connect the Air conditioner with the tent, tent inside is far away from the noise, give comfortable and quite tent ;
• Easy transportation, have four wheels in the bottom, can easy move on the ground.
• Temperature Control by LCD Wire Controller, Have Cooling, Heating, Dehumidification,Ventilation,Fresh Air(Customization), Purification Air(Customization) ;
