Bacon drying equipment upgrade

It is understood that in the drying process of food, in order to avoid the surface of the meat dry, scab, temperature and humidity should be adjusted in a timely manner. However, there are some unavoidable problems with traditional smoked bacon, such as long process cycles, difficulty in continuous production of equipment, and unstable manual product quality. In addition, the traditional smoked bacon will have a certain amount of 3,4-benzopyrene and formaldehyde after it is smoked with wood chips. Both have a certain degree of carcinogenicity, and there is a certain pollution to the environment. Taking into account the growing demand from consumers for bacon quality, traditional bacon drying methods need to be improved.

Taking into account that most companies today have adopted a new drying method to replace the traditional smoke oven drying, such as high-frequency vacuum drying, solar drying, heat pump drying and so on. However, vacuum high-frequency drying and solar drying have high technical difficulties and investment costs. As a stable, low-energy clean energy, heat pump drying has been widely used. For consumers, in addition to carcinogenic materials, the most prominent disadvantage of traditional bacon is the problem of scabbing and dryness on the skin of the product, which seriously affects the taste of the product. At present, the domestic heat pump drying process is to heat-sink the fresh meat and heat-pump it. After the moisture is reduced to 45%, it enters the green smoke stage and is finally vacuum-packed. Since there is no obvious constant speed stage during the drying process of the meat product, it is necessary to adjust the control of the drying temperature and the humidity in stages so as to ensure that the dried product has a compact structure, a full color and a suitable hardness.

In the era of rapid development of science and technology, frequency conversion technology provides more operability and convenience for various industrial production processes. In the process of heat pump drying, the combination of frequency conversion technology and terminal Internet technology not only can realize automatic control of the whole process, but also preset temperature and humidity curves. The biggest bright spot lies in realizing multi-terminal real-time control. Users can monitor and adjust the drying process through vehicle terminals, PC personal computers, mobile phones and tablets.


1.Diesel engine brand options: PARKINS, CUMMINS, MERCEDES-BENZ MTU, MWM, DEUTZ, JICHAI series;

2.Alternator brand options: SHANHUA, GUANGZHOU ENGGA,WUXI STANFORD,  SHANGHAI MARATHON, SIEMENS series;

3.Standard diesel generator set configuration:

Output type:three-phase&four-wire

Frequency:50HZ

Speed:1500RPM

Rated power:400/230v

Cooling type:closed water-cooling

Protection grade:IP23

Insulation grade:H

4.Optional configuration: 4 protection, self-starting, switching, rainproof generator set, container generator set, Silent Generator set, soundproof generator set,mobile power station.

5.The control system of genset with the mechanical speed governors system is the normao panel;The control system of genset with the electronic speed governors system and the electronic fuel injection system is the standard model.Diesel generator set power station using standard conditions,environment temperature:40℃;altitude:1000m relative humidity:60%.

1000-2500kva diesel Generator


1000-2500Kva Generator

1000-2500Kva Generator,Kva Silent Generator,Kva Silent Type Diesel Generator,Electric Diesel Generator

SHANDONG HUALI ELECTROMECHANICAL CO.,LTD , http://www.shanhuachina.cn