Wave pumps are widely used in large-scale fish rearing, such as: dragon, parrot, koi, lucky money, maps, etc., with wave pump can create artificial water flow, waves, so that the fish in similar river environment growth, at the same time, Dissolved oxygen in water greatly increased, full exchange of microorganisms in water, fish growth and development. Now let's talk about what are the concrete pump models. The controller has 5 modes. Model can be selected through the model, mode functions are as follows: 1, Fixed flow mode: Press "model" key to the first digit of digital display as "1", it means fixed flow mode. In this mode, the user can select the size of the traffic by pressing the "speed" key. The traffic is divided into 8 levels. Digital display "11" for the minimum flow, showing "18" for the maximum flow. Users can adjust the size of the traffic according to the actual needs. 2, flow making wave mode: press "model" key to the first digital tube display is 2 is the flow of water making wave mode. In this mode, you can change the effect of the fixed program by using the "speed" button. There are 8 files in total, which can be adjusted according to the biological needs in the water. 3, the classic waves making mode: press the model button to the first digital display is "3" is the classic wave making mode. When using this mode, the "speed" key needs to be used to adjust the wave shape. Because the volume of the water in the cylinder is different from the size of the cylinder, the wave period needs to be adjusted by the "speed" key. Only when the length of the wave is equal to the length of the cylinder, Waves can reach the maximum wavelength is divided into 15 files. Digital tube shows "31" for the minimum wave length, "3F" shows the maximum wavelength. 4, feeding function: press the "FEED" button LED display as "49" is enabled feeding function. Wave pump stop working, so that water is still, easy to eat fish. Digital display "49" for 10 minutes countdown began, "40" for 10 minutes countdown ended. After 10 minutes, the wave pump automatically starts the work according to the mode before entering the feeding. If the work needs to be returned during the feeding process, press the "FEED" key to return to the mode before feeding. 5, light control night mode: controller in the daytime light, you can run the above four modes. In low light at night, the nixie tube shows "00" while working in a weak push mode.
China manufacture ER32 collet chuck with cat 40 shank tool holder
Collet Chuck accepts all ER32 collets Collets Chuck Holder,CAT40 Collets Chuck Holder,CAT40 Tool Holders,CAT40 Collets Holders SISHUI TELI TOOL CO.,LTD. , https://www.er-collets.com
Works on all CAT 40 machines
Not threaded for internal stop screw
All critical tool holder surfaces precision ground
Made from alloy steel hardened to 54 - 56hrc
Tool Holder is Balanced to G2.5 at 20,000 rpms
Collet nut is included
Coolant thru capability
Concentricity is less than .0001 at collet face
MariTool Part# is CAT40-ER32 tool holder
Wave pump made of what mode? What are their characteristics?
ã€Print】 ã€Close】