Agricultural fuel-saving "eight not"

A good fuel-saving effect depends not only on the technical condition of agricultural vehicles, but also on scientific and skillful driving.
In the case of not dragging, try to use high-speed driving, do not use low-speed throttle.
Do not abuse brakes. The braking should be reduced as much as possible while driving, and the engine and the low-end position must be used to achieve the same effect as the brakes.
Do not run at a high speed for a long time. Because the vehicle is still running at a certain speed, it needs to consume a certain amount of fuel, or it can be turned off and restarted to save fuel.
Do not stop suddenly and suddenly accelerate. Before stopping, plan ahead. Do not want to stop braking. You should use the vehicle's freewheeling to stop. Sudden acceleration not only exacerbates machine wear, but more importantly it consumes about 1/3 more fuel than uniform acceleration. Therefore, when acceleration is required, the accelerator should be stepped on smoothly to achieve the required speed.
Choose the right road when driving, don't rush. According to tests, driving on bumpy roads is about 1/4 more fuel efficient than on good roads, and there are good roads that should be taken as far as they can (it's better not to lose out).
Make sure that you have a long way to go. Do not go blindly. First of all, we must be familiar with the route and prevent the East from looking for waste. Second, to go to bed early and get up early, pay attention to avoid people on the road more crowded high-speed time.
Choose economic speed, don't blindly ask for it. The faster the vehicle is, the more fuel-efficient it is. Of course, too slow a vehicle will increase fuel consumption.
Do not carry unnecessary items. Weight is the biggest enemy of fuel consumption. When you drive in the winter, you need to eliminate the weight on the car in time, and heavy, damp snow blocks will also increase fuel consumption.

With more than 20 years experience, Our Die Springs cover JIS, ISO 10234 and American standards. Imported materials, skilled employees and advanced production porcess provide you  the right load and the  longest lifespan. Our die springs have been used to replace imported brand in both domestic and overseas market 

Die Springs

Die Springs,Raymond Die Springs,Danly Die Springs,Heavy Duty Die Springs

Changsha Borun Mould Co. Ltd. , http://www.borunmouldparts.com