Pneumatic products include pneumatic components, pneumatic joints, pneumatic valves, cylinders, pneumatic pipes and other products. Pneumatic connector, PU Pneumatic pipe, Pneumatic air Cylinder, Air source treatment, Pneumatic Solenoid Valve, Pneumatic Tools Glove Industry Co.,Ltd. , https://www.gloveind.com
It is understood that the new technology of large-scale marine stainless steel equipment winch with a rated tension of 100KN is particularly important for the development of the growing high-end cruise industry. Because the high-salt seawater in the marine environment is easily corroded by ordinary steel plates, ordinary winches are not on the ship. The month is rusty, which greatly affects the safety and appearance of the ship and improves the maintenance cost of the ship. The 316 stainless steel mooring winch developed by Jiesheng in the new era completely eliminates the worries of the shipyard and the shipowner! Greatly reduce the operating costs of the ship.
The growth rate of mooring winches in Jiesheng's economic income continues to exceed the average level of windlass, winches and steering gears. Currently, it is at the critical stage of national supply-side reform and development. Cruise and marine economy are promising strategic opportunities. The mooring winch project department will be based on the new era and new orientation. The company has clearly stated that the winch products should be at the forefront of domestic and foreign counterparts in terms of high quality development. The winch project department should comprehensively implement the company's spirit of innovation and development, take the guidance of socialism with Chinese characteristics in the new era as a guide, seize development opportunities in the national major strategy, and pursue catching up and surpassing the pace in promoting high-quality development. The overall situation makes more contributions.
Pneumatic components work by the pressure of gas or the force generated by expansion, that is, the elastic energy of compressed air is converted into kinetic energy. Such as cylinder, pneumatic motor, steam engine, etc. Pneumatic component is a form of power transmission, also known as energy conversion device, which uses gas pressure to transfer energy.
Pneumatic quick connector is a kind of quick connector which is mainly used for air piping and pneumatic tools. It can connect or disconnect the pipeline without tools. When the connector is not connected - when the parent's ferrule moves to the other end, the stainless steel ball will automatically roll outward, and the daughter will be disconnected under the action of the common valve spring force of the parent and the daughter, and the daughter and the parent's valves will be closed respectively, The fluid flow is blocked instantaneously.
Pneumatic Valve is driven by compressed air. It can be used to control the flow of air, water, steam, various corrosive media, mud, oil, liquid metal and radioactive media. In the current market economy environment, it is not perfect. For the sake of product competition, the manufacturers of pneumatic valves carry out different innovations under the concept of unified design of pneumatic valves, forming their own enterprise standards and product personality. Therefore, it is very necessary to put forward the technical requirements in detail when purchasing the pneumatic valve and reach a consensus with the manufacturer as an annex to the pneumatic valve purchase contract. This kind of valve should be installed horizontally in the pipeline.
Pneumatic products include pneumatic components, pneumatic joints, pneumatic valves, cylinders, pneumatic pipes and other products.
Pneumatic connector, PU Pneumatic pipe, Pneumatic air Cylinder, Air source treatment, Pneumatic Solenoid Valve, Pneumatic Tools
Glove Industry Co.,Ltd. , https://www.gloveind.com