EPS Block Molding Machine for Insulation Panel and Construction

Model NO.: GB-SPB-400
Trademark: GB
Transport Package: Container
Specification: 4000x1200x1000
Origin: Zhejiang
HS Code: 84779000
Model NO.: GB-SPB-400
Trademark: GB
Transport Package: Container
Specification: 4000x1200x1000
Origin: Zhejiang
HS Code: 84779000

EPS Block Production Line

Whole process: EPS Beads – pre-expander – silo – block molding machine – cutting machine – EPS sheets or profile

Auxiliary equipment: Steam boiler and accumulator, air compressor and air receiver, water cooling tower and pumps

EPS block molding application:

EPS sheet for insulation

EPS element for construction

EPS profile for decoration
EPS Block Molding Machine for Insulation Panel and Construction

Daily 300 cubic Meter EPS Block Production Line list

1 BATCH PRE-EXPANDER SPJ150B 
Density :8-30g/l 		1unit
2 EPS BLOCK MOLDING MACHINE SPB400
WITH VACUUM SYSTEM LENGTH
Length 4m x 1.2 mx 1m 		1unit
3 CUTTING MACHINE SPC400 1units
4 Re-Cycling Machine  1unit
B Auxiliary Equipment  
5 SILO(Semi-Auto) SYSTEM 20units
6 AIR COMPRESSOR   3.6m3/min, 7 bar 1unit
7 COMPRESSED AIR TANK WITH ACCESSARY  2 m2 1unit
8 STEAM ACCUMULATOR  12m3 volumn 1unit
    9 COOLING WATER PUMP,COOLING TOWER
50m3/hour , as well as 7.5kw pump.   		 unit
10 STEAM BOILER   2 tons per hour , 1Mpa 1unit
     

Main equipment:
EPS Pre-expander with double expansion 
EPS Block Molding Machine for Insulation Panel and Construction

Chamber diameter mm 1600
Chamber height mm 2000
Outer steam pressure Mpa 0.4-0.6
Inner steam pressure Mpa 0.015-0.05
Steam consumption kg/h 200
Outer air pressure Mpa 0.4-0.6
Inner air pressure Mpa 0.4-0.6
Air consumption m3/h 31
Capacity kg/h 600-1300
Tolerance   ±3%
Connected load kw 32
Power supply v/hz 380/50
Weight kg 6500

Three Safety features and protective fence on top
 -  All procedures are controlled by HMI & PLC, all parameters can be revised in HMI with easy operation
 -  All material connected with EPS resin in expansion Chamber are made of SUS 304 Stainless steel  
 -  High density Rock wool used for insulation layer to reduce temperature undulate & steam consumption.
 -  Steam system controlled by origin Japanese Pressure Reduction Valve, Brand "Yoshitake" 
 -  EPS Resin weight in Each cycle are controlled by accurate weight sensor
 Stable pressure & stable temperature insure density tolerance within 3% 
-  Second Expansion is available for lower density
-  The Fluid bed equipped with special heater to shorten beads aging time and reduce energy consumption.
 All electronics are brand Schneider, pneumatic valves are brand Airtec

Block molding machine 
EPS Block Molding Machine for Insulation Panel and Construction

EPS Block Molding Machine for Insulation Panel and Construction
 
Item   type  PSB-DZ200 PSB-DZ300 PSB-DZ400  
PSB-DZ600
Mould cavity size mm 2040*1240*1030(mm) 3060*1240*1030(mm) 4080*1240*1030(mm) 6100*1240*1030(mm)
Block size  mm  2000*1200*1000(mm) 3000*1200*1000(mm) 4000*1200*1000(mm) 6000*1200*1000(mm)
Baby Pull-Up Pants Production Line

Baby Pull-Up Pants Production Line,Baby Pull-Up Pants Making Machine,Baby Pull-Up Pants Machine,Ncontinence Underwear Production Line

GUANGZHOU XINGSHI EQUIPMENTS CO,.LTD. , https://www.tamponfactory.com