Full Automatic New Design Plastic Bottle Blowing Machine

Model NO.: VS Series
Warranty: One Year
Capacity: 2, 4, 6, 8 Cavity
Product Name: Bottle Blowing Machine
Application: Beverage Bottle, Oil Bottle
Controlled by: PLC
Power: 220V, 380V 50Hz, 60Hz
Trademark: VESHINE
Transport Package: in Wooden Carton
Specification: 2.6*1.8*1.8
Origin: Zhangjiagang
HS Code: 8422301090
Model NO.: VS Series
Warranty: One Year
Capacity: 2, 4, 6, 8 Cavity
Product Name: Bottle Blowing Machine
Application: Beverage Bottle, Oil Bottle
Controlled by: PLC
Power: 220V, 380V 50Hz, 60Hz
Trademark: VESHINE
Transport Package: in Wooden Carton
Specification: 2.6*1.8*1.8
Origin: Zhangjiagang
HS Code: 8422301090
Full Automatic New Design Plastic Bottle Blowing Machine

BL Series:
Feature of plastic bottle blowing machine:
  1. Simplified operated by MMI control panel.
  2. Applications :All Kinds of small PET bottles.
  3. Modular design facilitates maintenance
  4. Crank clanping structure, close and open mold more easily.
  5. Blast-air heating and cooling more uniform structure type oven
  6. Machine is very safety stabilization and no waste.
Model Unit BL-2000
(Standard) 		BL-4000-L BL-4000-L BL-6000-L BL-8000
Clamping System Number of cavity cavities 2 4 6 6 8
Calmping unit KG 20000 48000 56000 65000 96000
Theoretical output BPH 2200 4000 5000 6500 7500
Machine dimension M 2.6*1.8*1.8 3.8*2.0*2.0 4.8*2.2*1.8 5.6*2.2*1.8 6.2*2.2*2.0
Machine Weight KG 3500 4000 5500 6500 7000
  
Technique Parameter of full-automatic blow molding machine:
MS-4000C full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
PLC control, full-automatic working
High adjusting performance to enable preheat the pre-forms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
Introduce the FESTO air cylinder to avoid contamination and noise.
Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
Strong clamping force with high pressure and double crank links to lock the mould.
Two ways of operating: automatic and manual.
Ideal cooling system makes the finished bottles without any flaws
Low rejection rate: less than 0.2 percent.

Details Of PET Bottle Blowing Machine

Full Automatic New Design Plastic Bottle Blowing Machine
Full Automatic New Design Plastic Bottle Blowing Machine
Full Automatic New Design Plastic Bottle Blowing Machine
Full Automatic New Design Plastic Bottle Blowing Machine
Full Automatic New Design Plastic Bottle Blowing Machine


Our service 
1 year quality warranty and supply spare parts at low cost for life span after sale. We keep the original 
drawings of spare parts, so it can match with the rest part of machine.
2. 24 hours/365 days online technical service.
3. Training offered

Why choose us
  1. Each water filling machine element tha contacts with the liquid is made of high quality Stainless steel 304, if needed, SS 316 is also available.
  2. The water filling machine adopts bottle neck holding transmission technology to realize fully automatic rinsing, filling and capping.
  3.  Most elements of the electrical system use famous international brand, such as Mitsubish, Omron brand.
  4.  The water filling machine obtain the advantages of good abrasive resistance,high stability,low failure rate, etc. Thequality of the equipments reaches the international advanced level.
  5. Advanced technologies, human-machine interface touch screen and PLC program control are adopted in this machine.
  6. Nozzles in the grab can guarantee the complete wash of the interior of the bottle.
  7.  Easy to operate, save the cost of workers.
Our Workshop:
Full Automatic New Design Plastic Bottle Blowing Machine
 
 

 Welcome to Visit Us and our factory
  Contact:Jenny Zhu
  Tel:+8617751206109
  Website:www.veshine.com



 

 

Full Automatic New Design Plastic Bottle Blowing Machine

BL Series:
Feature of plastic bottle blowing machine:
  1. Simplified operated by MMI control panel.
  2. Applications :All Kinds of small PET bottles.
  3. Modular design facilitates maintenance
  4. Crank clanping structure, close and open mold more easily.
  5. Blast-air heating and cooling more uniform structure type oven
  6. Machine is very safety stabilization and no waste.
Model Unit BL-2000
(Standard) 		BL-4000-L BL-4000-L BL-6000-L BL-8000
Clamping System Number of cavity cavities 2 4 6 6 8
Calmping unit KG 20000 48000 56000 65000 96000
Theoretical output BPH 2200 4000 5000 6500 7500
Machine dimension M 2.6*1.8*1.8 3.8*2.0*2.0 4.8*2.2*1.8 5.6*2.2*1.8 6.2*2.2*2.0
Machine Weight KG 3500 4000 5500 6500 7000
  
Technique Parameter of full-automatic blow molding machine:
MS-4000C full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
PLC control, full-automatic working
High adjusting performance to enable preheat the pre-forms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
Introduce the FESTO air cylinder to avoid contamination and noise.
Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
Strong clamping force with high pressure and double crank links to lock the mould.
Two ways of operating: automatic and manual.
Ideal cooling system makes the finished bottles without any flaws
Low rejection rate: less than 0.2 percent.

Details Of PET Bottle Blowing Machine

Full Automatic New Design Plastic Bottle Blowing Machine
Full Automatic New Design Plastic Bottle Blowing Machine
Full Automatic New Design Plastic Bottle Blowing Machine
Full Automatic New Design Plastic Bottle Blowing Machine
Full Automatic New Design Plastic Bottle Blowing Machine


Our service 
1 year quality warranty and supply spare parts at low cost for life span after sale. We keep the original 
drawings of spare parts, so it can match with the rest part of machine.
2. 24 hours/365 days online technical service.
3. Training offered

Why choose us
  1. Each water filling machine element tha contacts with the liquid is made of high quality Stainless steel 304, if needed, SS 316 is also available.
  2. The water filling machine adopts bottle neck holding transmission technology to realize fully automatic rinsing, filling and capping.
  3.  Most elements of the electrical system use famous international brand, such as Mitsubish, Omron brand.
  4.  The water filling machine obtain the advantages of good abrasive resistance,high stability,low failure rate, etc. Thequality of the equipments reaches the international advanced level.
  5. Advanced technologies, human-machine interface touch screen and PLC program control are adopted in this machine.
  6. Nozzles in the grab can guarantee the complete wash of the interior of the bottle.
  7.  Easy to operate, save the cost of workers.
Our Workshop:
Full Automatic New Design Plastic Bottle Blowing Machine
 
 

 Welcome to Visit Us and our factory
  Contact:Jenny Zhu
  Tel:+8617751206109
  Website:www.veshine.com



 

 

"Gravity Die Casting. A permanent mould casting process, where the molten metal is poured from a vessle of ladle into the mould, and cavity fills with no force other than gravity, in a similar manner to the production of sand castings, although filling cn be controlled by tilting the die."

Gravity Die Casting

Sometimes referred to as Permanent Mould, GDC is a repeatable casting process used for non-ferrous alloy parts, typically aluminium, Zinc and Copper Base alloys.

The process differs from HPDC in that Gravity- rather than high pressure- is used to fill the mould with the liquid alloy.

GDC is suited to medium to high volumes products and typically parts are of a heavier sections than HPDC, but thinner sections than sand casting.

There are three key stages in the process.

  1. The heated mould [Die or Tool] is coated with a die release agent. The release agent spray also has a secondary function in that it aids cooling of the mould face after the previous part has been removed from the die.
  2. Molten metal is poured into channels in the tool to allow the material to fill all the extremities of the mould cavity. The metal is either hand poured using steel ladles or dosed using mechanical methods. Typically, there is a mould [down sprue" that allows the alloy to enter the mould cavity from the lower part of the die, reducing the formation of turbulence and subsequent porosity and inclusions in the finished part.
  3. Once the part has cooled sufficiently, the die is opened, either manually or utilising mechanical methods.

Advantages

  • Good dimensional accuracy
  • Smoother cast surface finish than sand casting
  • Improved mechanical properties compared to sand casting
  • Thinner walls can be cast compared to sand casting
  • Reverse draft internal pockets and forms can be cast in using preformed sand core inserts
  • Steel pins and inserts can be cast in to the part
  • Faster production times compared to other processes.
  • Once the tolling is proven, the product quality is very repeatable.
  • Outsourced Tooling setup costs can be lower than sand casting.

Gravity Casting Parts

Gravity Casting Parts,Aluminum Alloy Gravity Casting Parts,Aluminum Gravity Die Casting Parts,Gravity Casting Aluminum Parts

HSI INDUSTRIEL LTD , http://www.hsiindustriel.com