LINA Disassemble Dispersion Kneader
LINA disassemble dispersion kneader provides excellent cleaning performance especially for sticky materials. Without affecting dispersion kneader's mixing effect, the rotor can be separated easily from the mixing chamber. This type of dispersion Internal Mixer is suitable for a variety of materials and able to provide a better performance dust seal for preventing material leakage.
Special design for CIM & MIM
1. Higher cleanness: Clean up the material without dead corners; the mixing chamber and rotors of the dispersion kneader can be separated completely; All surface that directly contact with the material is mirror polished, which ensure all the materials easy to clean without stickiness.
2. Wearable inner cavity: Imported special new alloy steel and vacuum heat treatment are adopted. Strong wear resistance, resistance to horizontal erosion, corrosion resistance and high glossy finish effects are achieved.
3. Adjustable rotor speed ratio: The speed ratio of rotors is adjustable, which target at some special material function requirements and achieve best dispersion effect and efficiency. The kneader with adjustable rotor speed ratio is designed especially for those materials that are sensitive of temperature/high require of different temperature/fast change rate of temperature/fast and span molecular chain diversification.
4. Temperature control system: A lot of trials report that stage temperature control has the essential effect of ceramics` color difference.
5. PLC intelligent control system: 1. Real-time data record and export of kneading time, temperature (mixing chamber and front/rear rotors), ram pressure, current, torque and recipe code. 2. The control system can be set up to 20 mixing steps, save 20 recipe spaces. 3. The control system is capable of remote importing of the process recipe and data monitoring, and communicating with MES via Ethernet communication interface. 4. An Ethernet communication interface and 20% of the control points are reserved. Touch screen is provided.
Specifications of LINA Disassemble Dispersion kneader
Type
Size (L)
Dimension (mm)
Weight (kg)
LN disassemble dispersion kneader
0.5
1600*900*1900
800
1
1600*900*1900
800
2
1600*900*2000
900
3
1600*900*2100
900
5
1900*1000*2100
1200
10
2200*1350*2150
2500
Disassemble Dispersion Mixer,Disassemble Kneading Machines,Rubber Disassemble Dispersion Mixer,Ceremic Disassemble Mixer LINA Machinery Industrial Co.,Ltd , http://www.linakneader.com
Production Capacity: 200-1000kg/h
Utility Model Patent: ZL 2010 2 0582466.4
The cable recycling machine is one of our products that are developed on our own. It is usually used to produce copper and recycle plastic granules. The separator is independently developed by ourselves and has rational structure, stable operation performance, and so on.
The separator of the cable recycling equipment is suitable for processing all kinds of cables. It can separate copper from plastic effectively by crushing, vibrating screening separation and vibration separation so as to achieve comprehensive utilization. It features good cost effectiveness, dust-free producing progress and second pollution-free property.
Besides, the cable recycling line can facilitate the installation, test running and delivery. You can just put it into use immediately when you receive it. Moreover, during the whole production process, the cable recycling facility only needs to be fed once because the volume for material is quite big. Custom products are available according to customers' requirements.
Model: 1000kg
Output kg/h1000
Machinery:
-Single sharft shredder WT4080
-Center Dust Removing System
-Boil Separator
-Static Separator
-Center Dust Removing System
Application:Â
This type machine is specially used for crushing and processing auto electrical wires and communication cables and other wires the diameter of the wires is less than 20mm and the wires are not suited to use wire stripping machine.Â
It works by many machine combination, crusher, vibration screen, dedust., conveyor, exhaust fan, motor etc. Copper can be completely separated by the metal screening. The separated copper is bright and smooth and has a purity up to 99%. It is an indispensable environment friendly machine control system in recycling waste cables and other relevant industries.Â
The copper which separated by the machine can remain the quality of the original copper, and the plastic can be recycled.Â
Feature:Â
(1) the automation degree of the whole line is high, it is easy to operate.Â
(2) during the process of sorting, PE, PVC and copper are recycled with 99%.Â
(3) the seperating copper has a purity up to 99%Â
(4)No pollutionÂ
(5) Energy savingÂ
(6) It is semi-permanent machine, only need to change the consumptive or wearing accessaries
Cable Cutting&Separation Machine
Production Capacity: 200-1000kg/h
Utility Model Patent: ZL 2010 2 0582466.4
The cable recycling machine is one of our products that are developed on our own. It is usually used to produce copper and recycle plastic granules. The separator is independently developed by ourselves and has rational structure, stable operation performance, and so on.
The separator of the cable recycling equipment is suitable for processing all kinds of cables. It can separate copper from plastic effectively by crushing, vibrating screening separation and vibration separation so as to achieve comprehensive utilization. It features good cost effectiveness, dust-free producing progress and second pollution-free property.
Besides, the cable recycling line can facilitate the installation, test running and delivery. You can just put it into use immediately when you receive it. Moreover, during the whole production process, the cable recycling facility only needs to be fed once because the volume for material is quite big. Custom products are available according to customers' requirements.
Model: 1000kg
Output kg/h1000
Machinery:
-Single sharft shredder WT4080
-Center Dust Removing System
-Boil Separator
-Static Separator
-Center Dust Removing System
Application:Â
This type machine is specially used for crushing and processing auto electrical wires and communication cables and other wires the diameter of the wires is less than 20mm and the wires are not suited to use wire stripping machine.Â
It works by many machine combination, crusher, vibration screen, dedust., conveyor, exhaust fan, motor etc. Copper can be completely separated by the metal screening. The separated copper is bright and smooth and has a purity up to 99%. It is an indispensable environment friendly machine control system in recycling waste cables and other relevant industries.Â
The copper which separated by the machine can remain the quality of the original copper, and the plastic can be recycled.Â
Feature:Â
(1) the automation degree of the whole line is high, it is easy to operate.Â
(2) during the process of sorting, PE, PVC and copper are recycled with 99%.Â
(3) the seperating copper has a purity up to 99%Â
(4)No pollutionÂ
(5) Energy savingÂ
(6) It is semi-permanent machine, only need to change the consumptive or wearing accessaries
Cable Recycling Machine/ Cable Cutting&Separation Machine
Model NO.: Tairong
HS Code: 84778000
Model NO.: Tairong
HS Code: 84778000
Cable Cutting&Separation Machine